USA 3.5/4/6/6.5/7HP Outboard Motor Boat Engine 2/4 Stroke Water /Air Cooling

Description

Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor. Don't do the following will avoid cylinder Scoring: 1, start the motor on bank 2, use the motor when it stop coming out of water Even if you want test the motor, it should be done in the river! When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked. 1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon 2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same
Store category
Sign Up Now !
You may also like
USA 3.5/4/6/6.5/7HP Outboard Motor Boat Engine 2/4 Stroke Water /Air Cooling
Product Description
HANGKAI 3.5/4/6/6.5/7HP Outboard Motor Boat Engine 2/4 Stroke Water /Air Cooling
C
ylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor.
Don't do the following will avoid cylinder Scoring:
1, start the motor on bank
2, use the motor when it stop coming out of water
Even if you want test the motor, it should be done in the river!
When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.
1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when one person on it or 4 people on it . Customer who has high expectations on speed, please be noticed
3.It can be marched with inflatable boats, rubber boats or fishing boats
4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat
MODEL ONE: 3.5HP & 2-Stroke(
TYPE ONE
)
Notice:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
.
our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
About certification:
We can
only provide CE certification
, there is no other  certification can be provided,thanks for your understanding.
SKU：OT-028
Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
STRICTLY FOR PROFESSIONAL USE ONLY
Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don't supply wearing parts (pull starter)for free.
If you want buy one please click:
Description:
Overall length:92CM
Overall widteh:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:10km/h
Type:2-stroke
Short shaft ：40cm
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 35:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
When at normal cruising, the appearance of the seventh picture. Falling back the boat, the appearance of the outboard motor likes the eighth picture . Falling back the boat, you should drive slowly otherwise the boat will not stable. The outboard motor backet can revolve 360. Only in simple let the engine revolve 180 and the operation handle face back, the boat can fall back to drive.
Announcements:
After in the sea water or turbid water cruising
1.
Use the fresh water cleaning the outboard motor
2
.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.
Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown.
4.
The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5.
Before the long term storing,you should run out of the gasoline in the fuel tank.
MODEL TWO: 3.6HP & 2-Stroke
Notice:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
.
our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
About certification:
We can
only provide CE certification
, there is no other  certification can be provided,thanks for your understanding.
SKU:OT-ML-132
Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
STRICTLY FOR PROFESSIONAL USE ONLY
1.Start-In-Gear protection/clutch feature prohibits prop rotation while idling
2.Lift/Tilt feature for shallow water operation and convenience
3.Features 360 degree steering rotation for reverse without gear shifting
4.Superior engine water cooling system for improved engine performance
5.Easy pull off engine cover with push button latch for instant motor access
Specification:
1)Max. Output: 2.6kw /3.6HP
2)Full throttle operating range (rpm): 4000-5000
3)Stroke: 2
4)Cylinder:1
5)Displacement (ml): 55CC
6)Bore×Stroke (mm): 44×33
7)Dimensions (L×W× H) mm: 365×220x920
8)Transom height:42cm
9)Starting system: Manual
10)Control system: manual tilt
11)Gear shift position: Clutch control
12)Gear ratio:2.08(27:13)
13)Propeller options: 3-7¼ "x 5"
14) Recommended Fuel: # 93 Lead-free gasoline
15)Recommended Gear Oil: Professional Gear Oil
16) Mixed Rating: Fuel : Oil (30/50:1)
17) Cold style: Water-cooled
18)Engine Position:Outboard
Product Description
Short shaft ：40cm
Features: Features 360 degree steering rotation for reverse without gear shifting .
Start-In-Gear protection/clutch feature prohibits prop rotation while idling .
Lift/Tilt feature for shallow water operation and convenience . Superior engine water cooling system for improved engine performance . Easy pull off engine cover with push button latch for instant motor access . Standard CDI ignition system for easy starting and improved
performance . Vertical mount engine design for increased power, performance and durability . Superior carbonation system with primer bulb for increased efficiency .
Twist grip throttle handle and engine stop button for improved response .
Superior outboard anti corrosion system and anodes for increased durability .
Durable cast Nylon plastic construction for superior corrosion protection .
Through the prop exhaust outlet for decreased noise and pollutant .
Heavy duty lightweight Nylon plastic cast propeller is standard equipment
Shipping Weight:
21.4 pounds
MODEL THREE:3.5HP & 2-Stroke (TYPE TWO)
Notice:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
.
our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
About
certification:
We can
only provide CE certification
, there is no other  certification can be provided,thanks for your understanding.
SKU：OT-ML-279
Two strokes 3.5 hp and 3.6 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
Please
N
otice:
STRICTLY FOR PROFESSIONAL USE ONLY
What you will receive is our new version of this boat engine
The trademark will be Yadao instead of Speeda.
Overall length:92CM
Overall widteh:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:12km/h(four people)
Type:2-stroke
Short shaft ：40cm
Ignition system:CDI system
Starting system:Manual start
Staring carburetion system:Choke start]
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel:Regular unleaded gasoline
Fuel to oil ratio:  35:1 （Please be suject to this version, and disregard the manual about this point）
Gear ratio: 27/13
When at normal cruising,the appe
a
r
a
nce of
the se
v
e
n
th picture. Falling back the boat, the appe
a
r
a
nce of the outboard motor likes the
eighth picture . Falling back the boat, you should
drive slowly otherwise the boat will not stable. The
outboard motor backet can revolve 360. Only in
simple let the engine revolve 180 and the operation handle face back,the boat can fall back to drive.
Announcements
After in the sea water or turbid water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the
air cylinder, from that will cause the engine breakdown.
4.The engine should deposit in the aridity and ventilated
well place,avoid exposing directly in the sunshine.
5.Before the long term storing,you should run out of the gasoline in the fuel tank.
MODEL FOUR:4HP & 4-Stroke
Notice:Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
STRICTLY FOR PROFESSIONAL USE ONLY
Type: 4 stroke 4 horsepower
Short shaft ：40cm
Capacity: 52cc
Transmission ratio: 2.08 (27:13)
The number of cylinders: 1
Maximum speed: 4000-5000
Maximum power: 2.8 kW /4 HP
Shift position: clutch control
Package volume: 95x40x30 cm
Ignition system: CDI
Cooling system: air cooling
Starting method: Manual start
Refueling: No. 93 gasoline
Propeller size: 7 1/4X7-A
The maximum fuel consumption: 1.4 liters / hour
Recommended Lubricant:4 stroke lubricating oil
Mixing ratio:Pure gasoline
Trim and tilt system:Manual Tilt
Start-In-Gear protection/clutch feature prohibits prop rotation while idling
convenience
Features 360 degree steering rotation for reverse without gear shifting
Cooling system: air cooling
Easy pull off engine cover with push button latch for instant motor access
MODEL FIVE:6HP & 2-Stroke
Notice:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
.
our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
About certification:
We can
only provide CE certification
, there is no other  certification can be provided,thanks for your understanding
STRICTLY FOR PROFESSIONAL USE ONLY
Technical Parameters
Dimension
Overall length 1040mm(40.9 in)
Overall width 872mm(34.3 in)
Overall height 332mm(13.1 in)
Transom height 44CM(17.3 in)
Short shaft ：40cm
Performance
Full throttle operating range 5000-6000r/min
Maximum output 4.4KW/6HP
Idling speed ( in neutral) 1000
±
100 r/min
Engine
Gear positions Forward-neutral-reverse
Gear ratio 2.15(28/13)
Trim and tilt system: Manual tilt
Drive unit
Recommended fuel Regular unleaded gasoline
Integral fuel tank capacity 2.5L
Recommended engine oil 2-stroke outboard motor oil
Engine oil type Genuine or recommended 2str engine oil
Lubrication System Engine oil mixed gasoline
Engine oil mixing ratio Fuel 50: Engine oil 1
Gear oil quantity 195ml(6.6 fl.oz.)
Tightening torque for engine
Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)
Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)
MODEL 6 :7HP & 4-Stroke
Notice:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
.
our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
Must read before use!
Four stroke 4 hp:
Firstly,Fill the gear oil (open gear box lid and fill it).
Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.
Thirdly,Fill engine oil don't exceed the head of the pattern.
Forthly,Pull the gear to netural gear, and plug the brake line in, hang the other side of the brake line on your wrist at the same time.
Then,turn the accelerator gets up to 50% and rapidly pull the starter line.
After the motor start ,please turn the gear to minimum before put another gear.
Otherwise, the gearwheel will be broken if you put high gear.
universal motors, high performance, reliable quality
Perfect match inflatable boats, fishing boats, sailboats, and small yachts.
Economical and compact structure. Durable, lightweight and anti-corrosive construction.
Maneuverable and safe twist grip throttle control.
Suitable for
: Freshwater and saltwater
One year warranty
covers the motor, to provide parts free
· U
Type:
4 stroke 7 horsepower
Capacity:
173cc
Transmission ratio: 2.08 (27:13)
The number of cylinders: 1
Maximum speed: 4500-5500
Maximum power: 5.1 kW /7 HP
Shift position: clutch control
Package volume: 120x60x42.5 cm
Ignition system:
TCI
Short shaft ：45cm
Cooling system:
air cooling
Starting method: hand start
Refueling: No. 93 gasoline
Propeller size: 3-7 1/2''x5''
Gear position:F-N-R
Control system: Tiller control
N.W./G.W.:26.7/31.7kgs
Recommended Lubricant：4 stroke lubricant oil
Trim and tilt system:Mannual tilt
Standard fuel tank capacity:1.4L/within
MODEL SEVEN: 6.5 HP & 4-Stroke
Notice:
Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us)
.
our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
About certification:
We can
only provide CE certification
, there is no other  certification can be provided,thanks for your understanding.
The Hangkai
6.5 hp 4-stroke
provides all the power you need for motoring in a small craft. This engine does that as well as providing fuel efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport! With all of this available at a competitive price, it is no wonder this little outboard receives so much attention and praise!
Brand:
HANGKAI
Displacement: 123CC
Gear ratio: 2.08(27:13)
Cylinder: 1
Max.Output(kw): 4.8
Max.speed(r/min): 5000-6000
Gear Positions: F-N-R
Packing size: 114x64x41cm
Ignition System: CDI
Cooling System: Water-cooling
Short shaft ：40cm
Control System: Tiller control
Starting System: Manual start
Control System: #93 gasoline
N.W./G.W.(kgs): 26/31.2
Bore x Stroke(mm): 59x45
Recommended Propeller range: 3 -7"x9"
Recommended Lubricant: Four Stroke Lubricating oil
Mixing ratio: Pure gasoline
Trim and tilt system: Manual Tilt
Overall LxWxH(cm): 78.3x34.3x103.9
Standard fueel tank capacity: 12L
Optional fuel tand capacity: /
Bonus accessories:
brochures, tubing, cotter pins
Pump impeller, start rope, start key
12 liter fuel tank, tool kit, spark plug, cylinder head pad
2-stroke
the engine oil must be a two-stroke special engine oil, and the two oils must be stirred evenly
In addition: After use, the fuel in the carburetor must be completely discharged.
4-stroke
use attention: must be standing when not in use
evenly
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feedback
On Jul-05-21 at 02:09:27 PDT, seller added the following information: