Low VOC high performance MERCEDES BLACK 040 urethane auto paint single stage

Description

You are looking at
A Complete Auto Paint Kit that will give you the High Quality Finish !
What you will receive is this Acrylic Urethane single stage kit is:
1 - Gallon of MERCEDES BLACK 040
premium acrylic urethane single stage (5XTAU SERIES)
1 - Quart of Medium Urethane Reducer
(5XT 8030 )
1 - Quart of
extra high gloss acrylic urethane (5XT8040)
3 - EA Quality 190 Micron Nylon Automotive Strainers
3 - EA Wood Paint Mixing Sticks
1 - Quart mixing cup
MIXING RATIO IS
4 - PARTS
5XTAU COLOR SERIES
1 PART 5XT8030
1 PART 5XT8040
5 STAR XTREME is a  2.8 VOC
Acrylic Urethane Colors are D.T.M. – Direct to Metal, high solids, high gloss
Performance is better when using DTM Primer.
Low VOC coatings intended for use as a protective maintenance coating for automotive and industrial applications, surfaces exposed to humidity, chemicals and corrosive elements.
Properly cleaned and sanded fiberglass, SMC, E-Coat and OEM finish.
POT LIFE Pot life will be about 3-5 hours at 77° F
SURFACE PREPARATION:
1. Wash area thoroughly with soap and water to remove contaminates that solvent based cleaners cannot remove effectively.
2. Clean area with Wax and Grease Remover.
3. Use a tack cloth to remove any surface contaminates that may have settled on the repaired areas prior to paint application.
4. Apply
5XTAU SERIES
High Performance Urethane Single Stage Color.
APPLICATION DIRECTIONS:
Adjust air pressure to 40-50 psi at gun for gravity, siphon feed guns or HVLP use 6-10 psi at air cap.
Apply 2-3 medium coats (maximum 2 mils wet per coat) or until hiding is achieved.
Allow a 15-20 minute flash time between coats and before force drying.
DRY TIMES AT 77°F:
FLASH TIME 15-20 MINUTES
TO DELIVER 16-24 HOURS FORCE DRYING AT 140°F:
PURGE TIME 15 MINUTES BAKE TIME AT 140°F 40 MINUTES RECOATING: 2.8 VOC
5XTAU SERIES
Urethane Single Stage Color may be recoated after 16-24 hours at 77° F.
After 16-24 hours it must be lightly sanded/scuffed before additional color or clearcoat may be applied.
ACCELERATOR & FISHEYE ELIMINATOR: Accelerator and/or Fisheye Eliminatory is not recommended for use in this product. CLEAN-UP: Clean spray equipment immediately after use with 5 STAR XTREME Gun Wash, or a high quality lacquer thinner, or compliant solvent depending on area regulations.
FOR FURTHER QUESTIONS PLEASE CALL US AT:
1-888-724-6844
Please check out our on line store for
Paint 'N' More....
Abrasives
Acrylic Enamel Paint
Acrylic
Enamel Paint Kits
Auto Body Supplies
Catalysts & Hardeners
Decals
Detailing Products
Enamel Clear Coats
Enamel Primer
Lacquer Paint
Lacquer Primer
Reducers
Specialty Paints
Tools
Urethane Base Coat
Urethane Base Coat Kits
Urethane Clear Coats
Urethane Primers
Urethane Single Stage
Urethane Single Stage Kits
Misc. Items
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.