Kirker Acrylic Urethane Ultra-Glo Hot Rod Black Satin - UA-70388

Description

Listing Template 2018
Home
About Us
Shipping
Returns
View Feedback
Contact Us
Kirker Acrylic Urethane Ultra-Glo Hot Rod Black Satin - UA-70388
Lend a smooth finish to your vehicle with the Kirker Acrylic Urethane - Hot Rod Black. This single-stage urethane topcoat is much more durable than the flat black primers, or cheap quality paints from the local hardware store. This topcoat exhibits the properties of durability and fade-resistance necessary for restoration work. It is available in satin and matte finishes.
Hot Rod Black provides a neat looking low-luster, uniform finish. It offers exceptional protection against chemicals, ultraviolet rays, and is built tough enough to withstand everyday use. It sprays easily and delivers superior resistance to scuffing, marring and scratching.
This acrylic urethane topcoat is great for a host of applications and it can be used as an accent or for a complete topcoat job on vehicles. In addition, the Hot Rod Black can also be applied to interior parts, under-hood components and chassis. When applied on truck and bus hoods, it can help to reduce sun glare.
Mix it with Ultra-Glo activator in the ratio 3:1
(Activator Sold separately)
. You can add one quart of activator to one 3/4 gallon of this topcoat. It is not necessary that you use a reducer; even if you do, the mix should not have more than 10% reducer.
How to use the Kirker Acrylic Urethane - Hot Rod Black
Prepare surface by removing traces of grease, wax, oil and other contaminants with a detergent wash, followed by a solvent wash. Abrade surface with a 600-800 grit sandpaper to promote sufficient adhesion to surface. Re-clean with final wash cleaner before using the topcoat.
Mix topcoat with activator in the ratio 3:1 by volume. Using a reducer is optional.
Use a siphon feed, gravity feed or HVLP gun for application of Hot Rod Black in two medium coats for obtaining the necessary coverage. Leave a flash time of 5 to 10 minutes between coats. At 68º F, it sets to touch within 20 minutes and dries within an hour. Leave it for 18-24 hours for a full cure.
Key Features of the Kirker Acrylic Urethane - Hot Rod Black:
Choice of two finishes – matte and satin
Choice of two intensities of activators – medium and slow
Quick and easy mix ratio of 3 parts urethane and 1 part activator
(Activator Sold separately)
Does not require additional reduction; reducer is optional and not more than 10% if used
Available as a high solids formula
Delivers exceptional flexibility, flow and leveling, and coverage
Stays durable for years, withstands chemicals and UV
Shows improved resistance to stone chips, marring, and scratching
Color sample shown for visual purposes only and is not 100% color accurate
Activator Sold separately
Technical Specifications
Appearance: Black paint (satin)
Weight per Gallon: 8.3 lbs
Package Measure: 3/4 U.S. gallon / 96 fl. oz. (2.84 liters)
Packaged VOC: 4.0 lbs/gallon (479 grams/L)
Made in the USA
ABTM part number: KIRK-UA-70388
Auto Body Toolmart has been serving the Automotive Industry for over 30 years. Buy with confidence.
About Us
Based in United States, autobodytoolmart has been an eBay member since Jul 03, 2000
Feedback
We will always help you to have a 100% positive happy buying experience. Contact us if you are unhappy about any aspect of your purchase from us. We only want five star feedback from you so buy with confidence.
View Our Categories