-40%

High Gloss Nardo Grey 2K Acrylic Urethane, 4:1 Gallon Fast Kit, SPK9712/SPK60

$ 78.67

Availability: 10 in stock
  • Paint Type: Acrylic Urethane
  • Restocking Fee: No
  • Item must be returned within: 30 Days
  • Color: Gray
  • Refund will be given as: Money Back
  • Brand: Speedokote
  • Returns Accepted: Returns Accepted
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Manufacturer Part Number: SPK9712/SPK60

    Description

    This sale is for
    High Gloss Nardo Grey 2K Acrylic Urethane, 4:1 Gallon Fast Kit, SPK9712/SPK60
    2.8 VOC Nardo Grey Single Stage Paint, Use in 60 - 70 F
    SPK-9712 is a 2 component acrylic urethane coating. It mixes 4:1 with a 5% optional
    reduction with Urethane Grade Reducer.
    This coating is a high quality single stage urethane topcoat.
    FEATURES:
    .True 2K Urethane Durability
    .Excellent Exterior Stability from UV Light
    .Fast Dry
    .Easy 4:1 Mix Ratio
    .Chemical Resistant Finish
    .Great Gloss and DOI
    GUN SETUP
    Fluid Tip psi
    HVLP Spray Gun 1.3mm,  8-10 psi
    APPLICATION
    Apply 2-3 medium wet coats. Allow 10 minutes flash time
    between coats.
    Dry Times:
    Dust Free: 10 minutes depending on temperature and activator selection
    Tack Free: 10 minutes
    Force Dry: 20 minutes @ 130°F (49°C)
    Delivery: Air Dry: 6-8 hours
    Bake: After cool down
    Health and Safety:
    See Material Safety Data Sheet and labels for additional safety information and handling instructions.
    *
    The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels and MSDS’s of all components, since
    the mixture will have the hazards of all its parts.
    * Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury.
    * Follow spray equipment manufacturer’s instructions to prevent personal injury or fire.
    * Provide adequate ventilation for health and fire hazard control.
    *
    Follow company, product MSDS and respirator manufacturer’s recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory
    requirements.
    * Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS.
    * Always observe all applicable precautions and follow good safety and hygiene practices.
    On Nov-19-13 at 08:47:28 PST, seller added the following information: