Glasurit 801-705 Cv-Hs Filling Primer EP Light Grey - 4 Litre Chromatfrei

Description

Glasurit 801-705 Cv-Hs Filling Primer EP Light Grey - 4 Litre Chromatfrei
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Glasurit 801-705 CV-HS primer filler EP light gray - 4 liters chromate-free
Can be used on Allen metallic substrates
Very good course
High filling capacity
Universally applicable
Very good protection against corrosion
Light gray (L05), tintable with 568-408
Can be painted over with Glasurit top coat 58, 68, 90 CV and 55 lines
Special instructions:
It cannot be ruled out that the product may contain particles < 0.1 μm. Products are only suitable for professional use. 2004/42/IIB (c I)(540)460: The VOC limit value prescribed within the EU for this product (product category: IIB.c I) in ready-to-use formulation is max. 540 g/l. This product has a VOC content of 455 g/l.
Remarks:
The surface should be clean and free of dust, rust, oil and grease. * 801-705 must be at least Flash off for 1 hour at 20°C before painting over with Line 90 CV or 55. **Due to the variety of metal alloys and manufacturing processes, it is recommended that a preliminary adhesion test be performed. See the manual from block A4 pre-treatment.
TECHNICAL INFORMATION
4:1:1 mix ratio by volume; Hardener 965-55
Adjustment suffix 352-91 CV, normal 352-216, long 352-345, very long
15 - 20°C20 - 25°C25 - 30°C Spray viscosity din 4 / 20° C 18 - 22 sec. din 4 pot life 20 °C - 8h
Glasurit 801-705 CV-HS primer filler EP light gray - 4 liters chromate-free Special instructions: It cannot be ruled out that the product may contain particles < 0.1 μm. Products are only suitable for professional use. 2004/42/IIB (c I)(540)460: The VOC limit value prescribed within the EU for this product (product category: IIB.c I) in ready-to-use formulation is max. 540 g/l. This product has a VOC content of 455 g/l.  Remarks: The surface should be clean and free of dust, rust, oil and grease. * 801-705 must be at least Flash off for 1 hour at 20°C before painting over with Line 90 CV or 55. **Due to the variety of metal alloys and manufacturing processes, it is recommended that a preliminary adhesion test be performed. See the manual from block A4 pre-treatment.  15 - 20°C20 - 25°C25 -
Herstellernummer
50706344
Marke
Glasurit
EAN
4007440891003