Car Emergency Power Start Cable Auto Battery Boost Jumper Cable Auto Power Wire

Description

FEATURE:
Copper end clamps with PVC-coated handles provide protection
The wires are covered with a thick PVC insulation layer to provide flexibility without kinks.
Weather resistance: Not affected by weather and temperature fluctuations.
Product name: 500A battery clip
Product material: PP
Product thickness: Diameter with rubber ring: 1.2 cm, copper wire thickness is 0.32 mm, composed of 115 strands
Recommended use: 500A/600A hotline is recommended for those below 2.0 displacement
SPECIFICATIONS:
Product Type: 500A emergency battery cable
Material: Copper and PVC
Product thickness: diameter with rubber ring: 1.2 cm
Copper wire thickness is 0.32 mm
Composed of 115 strands
Red line: positive
Black cable: negative
THE CONNECTION PROCEDURE IS AS FOLLOWS:
First, clamp the red wire of the starting cable on the positive pole of the red battery of the "rescued car".
Then clamp the red wire at the other end to the positive pole of the red battery of the "rescue vehicle".
Clamp the black wire onto the black negative battery of the "saved".
Then clamp the black wire on the black negative battery of the "rescue vehicle".
Start the engine of the "rescue vehicle" first, and then start the engine of the "rescue vehicle". If you find that the rescued vehicle still cannot be started, please check whether the metal contact part is in poor contact.
PRECAUTIONS:
The two vehicles cannot have any contact, and the two vehicles must have the same voltage.
If the battery freezes in winter, please do not use this starter cord.
Before connecting, the engines, audio and air conditioners of the two cars need to be turned off.
After you finish starting the engine, you need to remove the starter wire in the reverse order, otherwise it may cause a short circuit
Package Included:
1 x Emergency power cord