-40%

Base Coat Touch Up Spray Can Automotive Paint code Dark Copper Metallic for Ford

$ 12.64

Availability: 100 in stock
  • Warranty: Yes
  • Country/Region of Manufacture: United States
  • Color: Burgundy
  • Paint Volume: 12oz.
  • Brand: Wanda
  • Condition: New
  • Manufacturer Color Name: Dark Copper metallic
  • Paint Type: Urethane Base Coat
  • Factory Color Code: T5
  • Manufacturer Part Number: code t5 Wanda base coat

    Description

    Dark Copper Metallic code T5
    base coat for Ford America
    2005 through 2011
    12 ounce spray cans base coat
    Touch Up paint
    for any car.
    base coat ( needs to be clear coated )
    Expedited shipping is not available
    Federal rule ground transported shipping Only
    Directions for use:
    Always start by washing the area that you are painting with liquid dish soap and water or wipe the area down with a wax and grease remover. You should then lightly scuff the area that you are painting with a gray scotch-brite pad, this will give the paint something to stick to. If using primer use a red scotch-brite pad before applying primer. After applying primer wait until fully dried, and then sand with 600 grit sandpaper.
    First test the spray can on something besides your car. Do this to get used to how the can sprays. Then spray the area that you are repairing with 2 to 3 coats of color (or until full coverage is achieved) waiting 10 minutes between coats. If you are using clear coat wait 45 minutes before starting to apply the clear coat. Apply 2 to 3 coats waiting 10 minutes between coats.
    Flexible Bumpers
    Our paints are extremely flexible and can used over metal or plastic. You will not need an additional flex additive for flexible bumpers.